Ethernet 10Base-T Straight
| RJ45 PLUG | RJ45 PLUG |
|---|---|
| T2 1 White/Orange | 1 TxData + pair 2/- |
| R2 2 Orange | 2 TxData - |
| T3 3 White/Green | 3 RecvData + |
| R1 4 Blue | 4 pair3 |
| T1 5 White/Blue | 5 |
| R3 6 Green | 6 RecvData - |
| T4 7 White/Brown | 7 |
| T4 8 Brown | 8 |
Guides
- Lamp Guide: General Information
- Lamp Guide: Fluorescent
- Lamp Guide: HID
- Lamp Guide: Incandescent
- Line Noise
- Power Surges and Spikes
- Brownouts
- Blackouts
- Heat Dissipation in Electrical Enclosures
- Hazardous Location Basics
- Basic Proximity Sensor Operations
- Occupancy Sensor Design Guide
- Occupancy Sensor Application Guide
- Color Application for HID Lamps
- Cutler-Hammer Heater Coil
- General Electric Heater Coil
-
Electrical Tables
- Allowable Ampacities Insulated Conductors
- Conduit Fill Table
- NEMA Straight Blade Configs
- NEMA Locking Blade Configs
- Common Conversion Factors
- Derate 3 Conductors in a Raceway
- Direct Current Motor Full Load Current
- Approximate Full Load Amperes
- Full Load Current: Three Phase AC Motors
- Full-Load Current: Single Phase AC Motors
- Specific Resistance
- Temperature Conversion Table
- UL Fuse Classification Chart
- Buck Boost Transformer Full Load Amps
-
Calculations
- Ohm's Law
- Electrical Formulas
- Full Load Formula
-
Datacomm Tables
- Attenuation for Coaxial and UTP Cables
- Backbone Runs: UTP Cable
- Basic/Channel Link Attenuation
- Basic/Channel Link Next Loss
- Cable Administration
- Category Cables
- Circuit Protection
- Common Ethernet Systems
- Common Types of Cabling
- Computer Circuits
- Copper Wire Limitations
- Digital Patch Cable (DPC) Coding
- 10Base-T Crossover Patch Cord
- 10Base-T Straight Thru Patch Cord
- General Cable Installation Rules
- UTP Cable Attenuation
- Installing Category Data Cables
- Parameters of EIA/TIA 568
- Separation from Sources of Interference
- Structured Cabling (568) Systems
- Standard Networking Configurations
- Telecommunication Outlet Specifications
- UTP Connecting Hardware
